Date: Sun, 16 Jun 2019 19:22:26 -0000
From: <john@kk9a.com>
To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Question on R-TA-45 Torque Bracket
<That is my concern too with rotating towers however there are many out
<there.
<John KK9A
## with a plane jane tubular mast, you just alternate sides of the mast, for
each yagi.
## EACH yagi needs to be TORQUE BALANCED ! Thats most of folks issues
right there.
Its dead simple to tq balance any yagi.
## Problem with the rotating tower concept is..... the tower is 3 sided.... so
ALL the yagis,
end up on the same tower face. The issue starts when all booms pointed
into the wind.
You still end up with a tq imbalance.
## with all booms broadside to the wind, the yagis are then again tq
balanced.... which is... the fix.
## Think of a rotating tower as a 100 to 200 ft long drive shaft.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|