Towertalk
[Top] [All Lists]

Re: [TowerTalk] Remote switch

To: n2ic@arrl.net, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Remote switch
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Fri, 25 Oct 2019 11:29:18 -0700
List-post: <mailto:towertalk@contesting.com>
On 10/25/2019 9:26 AM, Steve London wrote:
Thanks for the tips on measuring isolation, Wes.

Measured a few switches I had laying around. Old B&W round switch. 70 dB @ 3.5 MHz, 60 db at 28 MHz. Not bad, considering. Array Solutions 2 antenna Stackmatch. 45 dB @ 14 MHz. Hmmm.

73,
Steve, N2IC

The legacy switches like the B&W shorted the unused ports
to ground as a "lightning protection" feature.  There was
some switch advertised as "Protax" that had this.
I believe for a wafer switch like this, it basically costs nothing
to do it.  With relays, it does cost something.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>