And the wire would have to be real close to the tower in order to go
between the tower and rotating ring.
Probably the only way to do this is shunt or gamma match the tower as
long as the matching wire was less than 30' long as that's where the
first rotating ring is located.
Rich - N5ZC
On 10/26/2019 7:41 AM, Richard Thorne wrote:
I have a 140' rotating tower. 130' above the rotation point with
several yagi's mounted from top to bottom.
Has anyone gamma matched a rotating tower on 160m?
Or would it be possible to run a 1/4 wire up the side of the tower,
spaced a couple feet away and insulated from the tower and feed the wire
as a quarter wave vertical? I'd have to come up with some method to
connect the feed to ground/radials.
Rich - N5ZC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|