[TowerTalk] New EZNEC updates available for both v. 6.0 and v. 5.0

[Dan Maguire <danac6la@gmail.com>]

For EZNEC v. 6.0 users, maintenance update v. 6.0.25 (4 April 2020) is
now available. See

http://eznec.com/Updates60.html
and
http://eznec.com/ez60updates/index.html

=================================================

For EZNEC v. 5.0 users, maintenance update v. 5.0.69 (23 March 2020)
is now available. See

http://eznec.com/Updates50.html
and
http://eznec.com/ez50updates/index.html

Important: If you are using Windows XP or Windows Vista be sure to
read the caution concerning 5.0.69 with those operating systems.

=================================================

For Pro/2 and Pro/4 users:  The URL for updates is printed on your
EZNEC Pro CD label.  Note that when the update appears to finish it
may still take several minutes for the hardware key device driver
software to be updated, so if you _immediately_ try to start EZNEC
after doing the update you will likely see the "hardware key not
found" error.  Just be patient, the new device driver will eventually
be installed.

=================================================

For AutoEZ users, revision v. 2.0.25 (19 July 2019) remains the latest. See

http://ac6la.com/aechanges.html
and
http://ac6la.com/autoez.html

Dan, AC6LA
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk