Use binoculars or telescope. Common failure is the wire connection from balun
to driven element. Can usually see this from ground.
73/Jon
Jon P. Zaimes, AA1K
Tower climber for hire
Website: aa1k.us
Cell: 302-632-2353
Email: jz73@verizon.net
Hug your favorite tower every day, and always stay connected to it
On Friday, July 17, 2020 Dave Thompson <thompson@mindspring.com> wrote:
Gang,
My Cushcraft 2 el 40 went dead on me and after checking the coax it seems
either the coax or balun may be bad.
Is there a way to use the MFJ antenna analyzer to check the problem from the
ground. The beam is mounted 10 feet above the TEnnedyne T-10 so its not easy
to physical check out. I will probably have to get a tower professional to do
the work.
73 Dave K4JRB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|