Hello Jeff:
Here is a SS 2.5" saddle clamp - the thread size is 3/8" - from DX
Engineering.
https://www.dxengineering.com/parts/dxe-sad-250b
73
Tim K3LR @ DX Engineering
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
felix1063@comcast.net
Sent: Monday, July 27, 2020 6:04 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Stainless Steel U Bolts
Hello All,
Can anybody tell me if they might have a lead on some Stainless Steel 1/4x20
U bolts spaced 2.5" on center? These are not usually a standard stock item
and are used for the mounting of some Yagi Antennas.
Thanks,
--jeff
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|