Towertalk
[Top] [All Lists]

Re: [TowerTalk] DIY conduit locator?

To: "'Tim Duffy'" <k3lr@k3lr.com>, "'Grant Saviers'" <grants2@pacbell.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] DIY conduit locator?
From: "tony.kaz--- via TowerTalk" <towertalk@contesting.com>
Reply-to: tony.kaz@verizon.net
Date: Wed, 28 Oct 2020 13:16:10 -0400
List-post: <mailto:towertalk@contesting.com>
Nice idea.
Tnx
N2TK, Tony

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Tim Duffy
Sent: Wednesday, October 28, 2020 11:49 AM
To: 'Grant Saviers' <grants2@pacbell.net>; towertalk@contesting.com
Subject: Re: [TowerTalk] DIY conduit locator?

Hello Grant:

As far as locating underground coax cables, I have had great success using
the Elecraft XG-3. I built a "flipper" adapter that takes the output center
conductor of the XG-3 and flips it on the outside shield for the coax cable
(the XG3 shield flips to the coax center conductor). Turn the XG3 on and use
0 dBm output hooked to the flipper and then to the coax under test. I use 80
meters. Then by using a hand held RX (SSB or CW) it is simple at ground
level to hear exactly where the coax is located. Terminating the far end of
the coax with a 50 ohm load can improve signal strength, but is not normally
needed.

73
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Grant
Saviers
Sent: Wednesday, October 28, 2020 11:11 AM
To: 'towertalk@contesting.com'
Subject: [TowerTalk] DIY conduit locator?

Trying to find a design for a empty conduit tracer.  We've dug at a 
couple of places at the 501c3 where it was "supposed to go", NG.  Seems 
to me this is a simple widget for energizing a test wire in the conduit 
or some sort of mouse - LF or magnetic placed on the end of a snake.

Some googling hasn't found a design so hoping a towertalkian has a 
design or link to one that works.  This 2" conduit was installed some 
time ago at 24" depth but where it routes is now lost.

The commercial tracers are $3000.  My budget is more like $20.  The 
usual AM radio and dongle SDR's are available.

Also interested for when I need it to exactly locate my coax conduits 
before digging.

Grant KZ1W
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>