There is only one direct method to measure wire tension which is
agnostic to the wire material - a dynamo meter.
Other methods such as deflection, pulse counting, catenary sag, etc,
require knowledge of the wire construction and materials.
-Steve K8LX
On 11/25/2020 6:31 PM, Steve wrote:
Probably not if you're thinking of deflection gauges. Of course you can
use a standard deflection gauge in the short steel EHS section of a guy
wire near the ground, which is a *normal* component of Philly guy systems.
-Steve K8LX
On 11/25/2020 6:23 PM, John Simmons wrote:
Are there gauges available for Phillystran?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|