Same here. Crimp shield and solder tip for in-shack jumpers. Tested out fine on
impedance and Vf using a Rigexpert AA-55. Routinely run 1200W or so.
73,
Bill WE5P
Comfortably Numb
> On Mar 8, 2021, at 16:02, Wayne Kline <[email protected]> wrote:
>
> I also finished my inner station jumpers with Harbour RG400 using crimp
> shield and solder Center conductor PL250 and BNC
>
> I have has No problems
>
> Wayne ,W3EA
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
>
> From: [email protected]<mailto:[email protected]>
> Sent: Monday, March 8, 2021 3:33 PM
> To: [email protected]<mailto:[email protected]>
> Subject: Re: [TowerTalk] Harbour Industries RG-400
>
> I bought a lot of Harbour RG400 on eBay for a very reasonable price. I
> have no way to test it. It has double shielding and I have had no
> issues with the jumpers that I made.
>
> John KK9A
>
>
> Jamie WW3S
>
> Anyone have experience with this? Its on Amazon but half the price of
> other manufacturers.
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> [email protected]
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> [email protected]
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk
|