The tower is a Universal 4-30
https://9eb0620e-668c-42b3-976b-ab2c46b32be7.filesusr.com/ugd/376c20_8bc492f5edcc4ffe8e6fcba94e3aca7a.pdf
https://www.texastowers.com/4-30.htm
Problem is the tower narrows from 13 inches at the bottom to 10 inches at the
top section.
At 10 inches feet feel like they are duct taped together and not much width at
the top tower section either to stabilize laterally. With the diagonal cross
bars there is no room for feet except sharing the same horizontal cross bar.
Appreciate all the comments so we can hash this out and get er done (without
breaking my neck).
de Wb8yqj Don
On Sunday, April 11, 2021, 11:34:06 AM PDT, Richard (Rick) Karlquist
<richard@karlquist.com> wrote:
On 4/11/2021 11:08 AM, Michael Murphy wrote:
> Looks like Rohn 20. You can always put one foot on one side of the
> triangle and one on another. That would give you a little more room.
>
> - Mike - KI8R
The original post said it was aluminum. That rules out Rohn.
Rick N6RK
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|