I need a drawing or list of fasteners for the TX-472. I know they're
ASTM a325 bolts/nuts.
I don't need the 27" bolts or the nuts for those: I bought them from
US Tower directly.
What I need are the 3 bolts each for the front / 4 bolts for the rear
flanges plus associated hardware (nuts/washers).
I suspect I can use Grade 5 hardware for the erection component
fasteners as those aren't structural members.
Anyone have a list of components & sizes or a drawing? Also need to
know about washers and where they go. The earlier owner only had
washers on the 2 hinge bolts and I don't even know if the placement of
the washers he had was correct.
Any help appreciated. Thanks!
--
Curt, WE7U http://xastir.org http://www.sarguydigital.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|