You probably mean LCF12-50.
The big issue with mating connectors and cables from different
manufacturers is the center conductor diameter/design.
LCF12-50 & LDF4-50 are both 1/2" annular corrugated cables so the shield
will be almost identical.
Depending on the dielectric, the center conductor might vary in diameter
a little bit. Some connectors can accept a little variation in center
conductor diameter and still make good contact.
Extract a piece of LDF4 center conductor and push it in to the RFS
center pin. Does it feel firm? If so, you should be good to go.
-Steve K8LX
On 5/13/2021 4:36 PM, Shawn Donley wrote:
I have several Cablewave 738801 Type-N female connectors for FCL12-50 cable.
Anyone know if these connectors can go on to Andrew LDF4-50A cable as well?
I'd love to find a matrix of hardline cable types and compatible connectors but
have never run across one.
tnx N3AE
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|