Grant,
It is not galvanized.
Thanks for the information.
Robie AJ4F
On Mon, Nov 8, 2021 at 12:17 PM Grant Saviers <grants2@pacbell.net> wrote:
> I assume it was hot dip galvanized so you could have that redone at any
> galvanizer - best way to go.
>
> Otherwise wire brush by power and hand off the surface rust, dirt etc
> and paint with Rustoleum rattle bottle Rusty Metal brown primer then
> grey primer (so you can see the coverage) then 2 costs of whatever color
> you like. That will last about as long as the HDG.
>
> I have this Rustoleum and process on tractor equipment left outside
> 20years w/o rust. No other big box paint comes close.
>
> On 11/8/2021 05:58, Robie Elms wrote:
> > All,
> >
> > I have a rigid base for an old Tri-EX tower that has never been
> installed.
> > It has some rust, not much. What surface preparation should I do before
> > installing it?
> >
> > Robie AJ4F
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|