Following this thread. I was unable to find the lug rated for solid
wire. I'd like to have this in my reference. Cat #?
--
73,
-de John NI0K in rural Debs, MN USA
Paul Christensen wrote on 11/17/2021 10:32 AM:
"For instance T&B CTL "copper one hole lugs, short barrel" are for "AWG stranded,
flexible cable, welding cable, and portable cord." You have to hunt way down to find something designed for
solid conductors."
Good point, Jim. Yes, #10 solid-wire Romex. See links below. This is what I
recently ordered from Mouser. These lugs have a tongued body which mate nicely
with the prop pitch's electrical barrier strip. However, not sure if it's
rated for solid or stranded #10 AWG.
https://www.mouser.com/datasheet/2/418/7/ENG_CD_327960_K3-2062872.pdf
https://www.mouser.com/ProductDetail/571-2-327960-1
Paul, W9AC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|