I have to 2nd the N4KG invert feed 160 vertical had it installed on a 105 ft
R-25 tower with a 3 element 40 yagi Hi Gain discover antenna.
Worked fantastic also JA ,HL UA0 contacts lost tower to daughter new HOME
☹
Wayne W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
From: Dave Thompson<mailto:thompson@mindspring.com>
Sent: Monday, January 24, 2022 11:19 AM
To: towertalk@contesting.com<mailto:towertalk@contesting.com>
Subject: [TowerTalk] 160 vertical dipole
I looked through all the answers to the 160 vertical dipole and have two more
types to consider.
1, There was a nice booklet with a blue cover by WA3FET of how to turn any
tower over 70 feet into a vertical dipole on 160. I am looking for my copy but
some of the old timers on towertalk might have a copy.
2. Tom N4KG (SK) had a great article in a 1994 QST on how to make a tower with
beams on to to use reverse feed with 4 elevated radials to make a great 160
antenna. I tried this on my tower with a 2 El 40 mounted 10 feet over a KT34XA
and found the 1830 point at 9 feet and hooked 4 short radials made from Spi-Ro
160 dipole haves. It worked great as I ran my first JA's which is hard from
GA. I even worked a RA0 just across from JA on SSB. He was so excited that he
sent me his QSL directly as I was his first SSB contact with the USA. I ran
into RFI problems with the TV and stereo equipment as my tower was right next
to the house so I had to look for another 160 antenna.
73 Dave K4JRB.
.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|