Towertalk
[Top] [All Lists]

[TowerTalk] Shunt fed tower on 160

To: towertalk@contesting.com
Subject: [TowerTalk] Shunt fed tower on 160
From: ARTHUR BERNSTEIN via TowerTalk <towertalk@contesting.com>
Reply-to: ARTHUR BERNSTEIN <n2ka@verizon.net>
Date: Sat, 9 Apr 2022 00:31:26 -0400
List-post: <mailto:towertalk@contesting.com>
Stan the tower and top loading sound like a reasonable starting point. The 
close proximity to a steel framed building is no help. Just guessing you will 
have a distortion of your pattern and hard to imagine how much signal loss, so 
as long as you maintain a maximum current point up near the top.
My concern is how will you accomplish an effective counterpoise system if 
you’re able to employ raised radials, that would be even better. This antenna 
will be better than no antenna on 160. Your lowest loss counterpoise or radial 
system is paramount.
Good luck.
Art., N2KA..

Sent from my iPhone
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>