I found the following replacement seals fit my older Hub City box - these
may or may not fit yours - check dimensions!
TCM #06081 VM-BX (input shaft)
TCM #20231 SM-H-BX (output shaft)
Hope this helps & good luck.
73
Matt
KM5VI
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of David
Needham
Sent: Monday, May 02, 2022 2:31 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Hub City Gear Reducer Seal Repair Kit
I have a Hub City Gear Reducer on my US Towers HDX 572MDPL crank up, tilt
over amateur radio tower that has a shaft seal leak. The part numbers on the
name plate are:
0220-6272-321
321 60/1 C
0205
"17" within a circle
If the "0205" is the manufacture date of Feb, 2005 (I bought the tower used
in 2011), at 17 years old, I am thinking it would be smart to replace all
the seals if one is leaking? Has anyone found a seal repair kit for this
gearbox that could share the particulars with me? Apparently it is not a
current model with Hub City.
Thanks!
Dave AA4VT
--
Thank you!
David Needham, AA4VT (formerly K4AJA and K8AJA)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|