Do you think it is safe to have two preforms with proper guy wire galvanized
thimbles (connected to guy wires via turnbuckles) at the end of a single
anchor rod? Without EQ plates?
Why is no one suggesting asking Rohn what they recommend?
There was a tower a few years ago that fell - because the wrong thimbles
were used and it caused the preform to fail.
I would never climb a tower that did not have the proper Rohn installation.
73
Tim K3LR
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Tuesday, May 3, 2022 10:15 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] 2 guys, one anchor?
Excellent point Steve. All of my Rohn anchors have five holes so I don't
use equalizer plates but I often wondered what these plates were equalizing.
Definitely a little space between turnbuckles is a good thing!
John KK9A
Steve Maki K8LX wrote:
Yes.
But an equalizer plate makes a much nicer install; in the end you'll be
glad you did it that way. It's not to "equalize" tensions, it's to
provide nice easy turnbuckle terminations. It should be called a
termination plate.
-Steve K8LX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|