I like Penetrox and Noalox for this application. Just be sure to clean the
old parts thoroughly before lube-reassembly. I like to use kerosene as a
cleaner, applied with an automotive parts cleaning brush.
Of course, you can always send it out for professional refurb.
73, Keith NM5G
On Thursday, September 29, 2022 at 07:00:40 PM CDT, Dave Sublette
<k4to.dave@gmail.com> wrote:
I don't know the conductive properties of that Permatex mixture. Since one
of the primary purposes of the Penetrox-type mixtures is to enhance
conductivity, I wouldn't use anything that wasn't designed for the purpose
of electrical conductivity.
Dave, K4TO
On Thu, Sep 29, 2022 at 7:45 PM <jc-smith@comcast.net> wrote:
> I'm reassembling an old Hy-Gain TH3-Mk III that I got from an estate years
> ago. When I reassembled it back then I used the Butter-its-not product
> from
> the Butternut antenna folks, and of course that's no longer available. I
> searched the archives and I see someone recommended Pentrox Ox-guard. I
> don't have that but I do have Permatex anti-seize lubricant and I'm
> wondering if anyone has used it and would it be a good replacement?
>
>
>
> Thanks & 73 - JC, K0HPS
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|