Towertalk
[Top] [All Lists]

Re: [TowerTalk] Pipe for guy anchor

To: Tyler Stewart <k3mm@verizon.net>
Subject: Re: [TowerTalk] Pipe for guy anchor
From: Ken WA8JXM <wa8jxm@gmail.com>
Date: Wed, 16 Nov 2022 18:12:48 -0500
List-post: <mailto:towertalk@contesting.com>
John is correct that "pipe" is poor for structural use.  The proper term
for what you need is "tube" which is structural and available in a wide
range of diameter and wall thickness.  It is also available in round,
square or rectangular form.

Tyler recommended angle iron (steel). I'm not an engineer but if I were
going to do that , I would use two pieces back to back in a "tee" form to
give it more strength.  As a teenager, I had a 50' tower guyed by 4x4x1/4"
angle with an eye-bolt drilled through the corner,  The angle iron was
driven in with a sledge hammer.  It  probably did not meet specs but it
worked for the few years I had it up.

On Tue, Aug 9, 2022 at 5:34 PM Tyler Stewart via TowerTalk <
towertalk@contesting.com> wrote:

> I recommend using angle steel.  Point the long side towards the tower and
> punch a hole up top for shackle or equalizer plate and bottom for rebar.
> It doesn’t require any welding (no doublers).  Of course use an engineer
> for certification.
> Ty K3MM
>
>
> Sent from the all new AOL app for iOS
>
>
> On Tuesday, August 9, 2022, 5:09 PM, john@kk9a.com wrote:
>
> Pipe has no structural specs but many people have used 6" diameter for
> elevated anchors. I used 4 foot high structural beams on two sides at my
> P40A 70 foot tower http://www.p40a.com to clear the roof of the house and
> I
> did not have room for the standard 80% anchor distance but fortunately it
> held up fine.  Be aware that a 6 foot high anchor should have a large
> concrete footing.  Of course to do this correctly it should be
> professionally engineered.
>
> GL
> John KK9A
>
> Rick Harrington N0VT wrote:
>
> I have a small lot and my tower is 70' of 25G.  Due to some obstacles in
> the yard that can't be worked around I need to sink some metal pipe in
> concrete and attach the guys about 6 feet up instead of taking them down
> to the ground.  I realize this isn't the preferred situation.
>
> What type of pipe should I be looking for?
>
> Thanks, Rick N0VT
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>