The Flexweave advertising used to quote my late friend, W5PJR, who claimed that
Flexweave could be spliced using a square knot, I know that sounds silly, but
I have used it without any issues, AFAIK.
I did use steel wool to clean off oxidation.
Jim N7US
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of john@kk9a.com
Sent: Monday, November 21, 2022 17:06
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Flexweave Question
With that type of termination it sounds like you plan on the antenna wire being
under a lot of tension. I have no personal experience with Flexweave but I
would be concerned about the small Ø0.005 wires breaking.
John KK9A
Martin Flynn W2RWJ wrote:
Any suggestion on the correct thimble size and nicopress (compression) sleeve
that would be used with #14 and #12 Flexweave?
Martin
W2RWJ
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|