I just put up a couple of runs of lmr 600 for my satellite antennas. I bought
some split wire loom (1”) and placed it over the cables for uv and abrasion
protection.
Gary K4FMX
> On Jun 21, 2024, at 9:48 AM, jim.thom jim.thom@telus.net <jim.thom@telus.net>
> wrote:
>
> Does anybody make a version of LMR-600UF that has a decent outer jacket on
> it....like what's used on RG-213U ??
>
> The outer jacket on LMR-600UF is super soft rubber, prone to knicks and
> abrasion, and does not seem to be UV resistant.
>
> Plan B is to use use 2" wide electrical tape, and cut it into say 24-30"
> lengths, and run the tape inline with the LMR-600UF, then wrap it around
> the coax jacket. Then the next 24-30" etc, etc.
>
> This is for a crank up tower, and no, I don't want to use LMR-400UF or
> 213-U.
>
> Jim VE7RF
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|