Towertalk
[Top] [All Lists]

Re: [TowerTalk] Identify old hard line

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Identify old hard line
From: Jim W7RY <jimw7ry@gmail.com>
Reply-to: jimw7ry@gmail.com
Date: Tue, 22 Oct 2024 11:14:26 -0500
List-post: <mailto:towertalk@contesting.com>
You'll have to post some pictures of it and send the link to the pictures to the list.

Attachments are not allowed here.

Jim W7RY


On 10/22/2024 10:50 AM, Art Greenberg wrote:
Please help me identify a length of hard line. I'm certain it is 50 ohm. It was originally purchased from Phelps-Dodge in NJ for a UHF repeater along with a duplexer and base station antenna. My memory of the dates isn't great, but I think it was around 1980, plus or minus a few years.

Measurements, approximate:

foam dielectric
center conductor solid copper, od 0.175
shield corrugated spiral copper, od 0.540
jacket od 0.640

I'd like to know if connectors are still available for this cable. It has a male Type N on each end, but there is a fair amount of corrosion present and any soft goods that were part of those connectors (seals, o-rings) are no longer useful.

Thanks.


--
Thanks and 73, Jim W7RY

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>