P.S.
The sheet overlap is held together with Dow Corning 736 heat-resistant RTV
sealant.
Paul, W9AC
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Paul Christensen
Sent: Sunday, June 22, 2025 8:00 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Thrust Bearing Concerns
>"seems like a good idea, if you have the McMaster-Carr part number it might be
>helpful. "
https://www.mcmaster.com/products/silicone/rubber-1~/high-temperature-silicone-rubber-sheets-bars-and-strips-6/
Item # 1460N34
Pricy, but not as pricy as a $2,500 prop pitch rebuild. Being silicone-based,
the sheet should hold up for a very long time. Check other sources for better
pricing.
Paul, W9AC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|