[TowerTalk] 3D Printed Boom-to-Element Brackets

[David Gilbert <ab7echo@gmail.com>]

Here's a video I made showing how you can 3D print your own 
boom-to-element brackets for a yagi or similar antenna, using whatever 
diameter boom or elements you prefer.  It probably is most applicable 
for VHF or UHF antennas, but might work for an HF antenna if you size 
the bracket properly and use a moderately high percentage infill.
https://youtu.be/csgvt7tEz_I

Take care es 73,
Dave   AB7E


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk