One ham manufacturer uses the term "100% ICAS duty". I call BS.
73
-de "Curly" John NI0K
QRZ.com<https://www.qrz.com/db/ni0k>
Hams Over IP<https://hamsoverip.com/> call me: 101468
On 10/2/2025 2:38 PM, Jim Brown wrote:
On 10/2/2025 10:47 AM, Steve Harrison wrote:
That was not the issue: the real issue was the thermal expansion and
contraction of the connectors causing the connectors to loosen over time. We
are talking about connectors that passed a kilowatt at 450 MHz heating up, then
cooling off suddenly as they were near or within the cool air-conditioned
stream from the rack's environmental systems.
Thanks for the detailed rundown, Steve. Very interesting. And, of course, the
difference between CCS and ICAS is always a factor.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com<mailto:TowerTalk@contesting.com>
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|