Towertalk
[Top] [All Lists]

Re: [TowerTalk] Choke on feed point of dipole

To: Tom Hellem <tom.hellem@gmail.com>
Subject: Re: [TowerTalk] Choke on feed point of dipole
From: Ken WA8JXM <wa8jxm@gmail.com>
Date: Mon, 12 Jan 2026 15:27:09 -0500
List-post: <mailto:towertalk@contesting.com>
How are  you determining that the resonance shafted down?

Ken WA8JXM

On Mon, Jan 12, 2026 at 1:50 PM Tom Hellem <tom.hellem@gmail.com> wrote:

> TT'ers:
>
> I made a choke to place at the feed point of a 20 meter vertical dipole.
> 9 turns of #14 thhn wound on a 2.4" mix 31 ferrite toroid.
> After I installed the choke, the resonant frequency appears to have
> moved approx. 1 mhz lower.
>
> Is this the behavior I should be seeing?
> I've used plenty of chokes on yagis, etc and never noticed this
> before.
>
> Modeling in Eznec shows that changing the ground constants
> does not appreciably change the resonance, so it seems that the fact  the
> ground getting wetter between the two measurements would not
> be the cause.
>
> Any ideas?
>
> Tom
> K0SN
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>