VHFcontesting
[Top] [All Lists]

[VHFcontesting] Affordable setup for 432

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] Affordable setup for 432
From: n9rla@yahoo.com (Dan Evans)
Date: Thu Jun 19 16:44:01 2003
Hi Folks,

I would like to present a topic for discussion.

In the near future, hopefully in time for the June contest, I'm planning to
add equipment for 432 and/or 222 to the Rover setup.  And, being as "no
budget" is a pretty good way to describe my setup, I'm looking for the most
affordable way to do this.  Now I would like to get an FT1000MP with a DEM
transverter and KW amp, but it just ain't gonna happen:-)

So how would you, or did you, go about it?

I've considered getting one of the Microwave Modules transverters, and
combining with a HTX 100 or something for an IF.  Not exactly high
performance, but would likely do the job.  My main rig is an IC746, but I
really don't want to modify it for transverters.

The old FT790's would be a good option.  A little more expensive than the
transverter above, but I wouldn't have to add the IF rig.  Sounds like a
very "rover friendly" solution.  I'm not sure how the performance would
compare.

I've also read that there are mods to the Ten-Tec 1210 transverter to put it
on 222 or 432.  But would still need to add the IF rig.

Appreciate any and all input,
73
Dan,
N9RLA /AE!

Hoping to have more than 2 bands by June!!

Dan Evans N9RLA
Scottsburg, IN 47170
{EM78}
IN-Ham list administrator
QRP-l #1269
N9RLA /R "no budget" Rover
Check out the Rover Resource Page at:
http://www.qsl.net/n9rla



<Prev in Thread] Current Thread [Next in Thread>
  • [VHFcontesting] Affordable setup for 432, Dan Evans <=