VHFcontesting
[Top] [All Lists]

[VHFcontesting] [Fwd: [TowerTalk] antenna and rotator control box]

To: <vhfcontesting@contesting.com>
Subject: [VHFcontesting] [Fwd: [TowerTalk] antenna and rotator control box]
From: n7au@televar.com (N7AU)
Date: Thu Jun 19 16:44:35 2003
I think I saw a post where someone on this list has done this or was
doing this also. You might send him a message.

  Bob
  N7AU

-------- Original Message --------
Subject: [TowerTalk] antenna and rotator control box
To: <vhfcontesting@contesting.com>
Date: Sat, 08 Feb 2003 19:33:20 +0000
From: Steve <ve3tu@rac.ca>
To: "towertalk@contesting.com" <towertalk@contesting.com>

This is directed to single op multiband contesters. I plan on building a
micro processor control for antenna selection and rotator control. The
number of band antennas, stacking combos and rotators are starting to
grow to the point where some automation is required. I would like to
know if there is any interest from other contester for such a
controller. Would some one be kind enough to cross post this to the
contesting reflector.

gl es 73 Steve VE3TU

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>
  • [VHFcontesting] [Fwd: [TowerTalk] antenna and rotator control box], N7AU <=