VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] ts2000 and vhf2000 (Joe Barnes)

To: vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] ts2000 and vhf2000 (Joe Barnes)
From: Ray J <ray@w9ray.org>
Reply-to: ray@w9ray.org
Date: Sun, 04 Mar 2007 21:45:34 -0600
List-post: <mailto:vhfcontesting@contesting.com>
do you have it set up in the menu right..?. it looks like you have to 
set 28a and 28b  to a on (1 or 2) position..

you are using pin 2  and ground  of the  EXT Cont. for 6 meters amp?

and pin 2 and 4 of the REMOTE cont. for the transverter...?

is that how you have it? .?? . i don not know... I do not have the radio...

just what i see looking at the manual


Ray J

W9RAY

en44gt
160m-13cm
www.w9ray.org

Bob Fischer wrote:
> Joe,
>
> I have the same problem with a TS-2000X and so have others. So far Kenwood
> has not admitted the problem as far as I know. The VHF/UHF bands all have
> solid state keying with a current capacity of 20ma through the "External
> Connector". The HF keying is a "control relay" through the "Remote"
> connector.
>
> I my case I use 28 MHz HF for a 222 transverter. When I key the 2000 on 50
> MHz it also keys the 222 transverter through the HF "control relay"! When I
> asked Kenwood about this they responded, "You must have something hooked up
> wrong, we have not had any complaints about this before". If you figure this
> out Joe, please let us all know...
>
> Thanks,
> Bob, W2SJ
>
> -----Original Message-----
> From: vhfcontesting-bounces@contesting.com
> [mailto:vhfcontesting-bounces@contesting.com] On Behalf Of
> vhfcontesting-request@contesting.com
> Sent: Sunday, March 04, 2007 12:00 PM
> To: vhfcontesting@contesting.com
> Subject: VHFcontesting Digest, Vol 51, Issue 11
>
> Send VHFcontesting mailing list submissions to
>       vhfcontesting@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
>       http://lists.contesting.com/mailman/listinfo/vhfcontesting
> or, via email, send a message with subject or body 'help' to
>       vhfcontesting-request@contesting.com
>
> You can reach the person managing the list at
>       vhfcontesting-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of VHFcontesting digest..."
>
>
> Today's Topics:
>
>    1. ts2000 and vhf2000 (Joe Barnes)
>    2. Re: ts2000 and vhf2000 (Roger N?VR)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 03 Mar 2007 19:00:31 -0500
> From: Joe Barnes <n4jbk@bellsouth.net>
> Subject: [VHFcontesting] ts2000 and vhf2000
> To: vhfcontesting@contesting.com
> Message-ID: <45EA0C1F.2030708@bellsouth.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I am trying to use a kenwood ts2000 with a commander vhf2000 for 6 and a 
> hf2500hp for hf. For some reason when I key the radio on 6 it keys the 
> hf amp. Of course there are separate keying lines. Anyone have any ideas 
> why? Thank you, Joe Barnes
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 4 Mar 2007 07:12:26 -0700
> From: Roger N?VR <n0vr@comcast.net>
> Subject: Re: [VHFcontesting] ts2000 and vhf2000
> To: "'Joe Barnes'" <n4jbk@bellsouth.net>,
>       <vhfcontesting@contesting.com>
> Message-ID: <20070304141238.01D96319BDC@dayton.contesting.com>
> Content-Type: text/plain;     charset="iso-8859-1"
>
> Possible issues:
> The pin assignments on the accessory plug are separate for each amp (and
> then controlled by menu options). If the amp keying lines are wired to their
> respective pins correctly, it may be a short between the HF line and the 6m
> line.
>
> -----Original Message-----
> From: vhfcontesting-bounces@contesting.com
> [mailto:vhfcontesting-bounces@contesting.com] On Behalf Of Joe Barnes
> Sent: Saturday, March 03, 2007 5:01 PM
> To: vhfcontesting@contesting.com
> Subject: [VHFcontesting] ts2000 and vhf2000
>
> I am trying to use a kenwood ts2000 with a commander vhf2000 for 6 and a 
> hf2500hp for hf. For some reason when I key the radio on 6 it keys the 
> hf amp. Of course there are separate keying lines. Anyone have any ideas 
> why? Thank you, Joe Barnes
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
>
> ------------------------------
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
> End of VHFcontesting Digest, Vol 51, Issue 11
> *********************************************
>
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>
>
>
>   

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>