Hi all, While the readouts run on DC, the CDE/HyGain Ham-X series MOTORS run on
24v. AC..
bill, k1DY
> From: n8um@comcast.net
> To: k4gun@comcast.net; vhfcontesting@contesting.com
> Date: Mon, 26 May 2008 20:42:44 -0400
> Subject: [VHFcontesting] K4GUN 6m Par Moxon and DC Rotors
>
> Nice setup. I looked at your pictures. Is your 6 meter Moxon mounted
> backwards with respect to your other antennas? I think it might be a driven
> element and reflector... Therefore the wire reflector element should be
> behind the square aluminum driven element. Any other guys got an opinion?
> I have misplaced my assembly sheet.
>
> Most rotators (Yaesu, Ham X series, Emoto, Alliance) run on 24vdc so there
> is no need to buy a dc rotor. I just bought a controller from MDS. It
> replaces my 110vac control box with a digital display and computer
> interface. The MDS controller uses a simple 2.5mm 13.8v dc hook up and
> supplies 24vdc for most rotator series. Pretty slick and half the price of
> other digital controllers. See http://www.mds-ham.com
>
> John B. N8UM Oak Ridge, Tennessee
>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|