VHFcontesting
[Top] [All Lists]

[VHFcontesting] For Sale: 6 and 2 meter transverters

To: vhfcontesting@contesting.com, vhf@w6yx.stanford.edu, pvrc@mailman.qth.net
Subject: [VHFcontesting] For Sale: 6 and 2 meter transverters
From: k3dne@comcast.net
Date: Mon, 26 Jan 2009 16:42:27 +0000 (UTC)
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>





1. I have a NIB (not opened) Yaesu FTV-1000 6 meter transverter (for use with 
the FT-1000MP Mark V) for sale. $800 plus shipping and insurance via UPS. USPS 
money order, cashiers check or Paypal. See additional description below. 


2. Down East Microwave 2 meter transverter 144-28 HP 60 watt output linear 
transverter. Options included: Common RF output, - 20dBM split IF, PTT-L and 
AUX to GND for external amplifier keying. Recently repaired by DEM - replaced 
Rx FET. Output level presently set to minimum by DEM for customization by user. 
http://www.downeastmicrowave.com/cat-frame.htm . $450 shipped CONUS. USPS money 
order, cashiers check or Paypal. 





73, 

Ed K3DNE 





The new Yaesu FTV-1000 is 6 meter transverter for the FT-1000MP MarkV . It 
utilizes the same high-performance power MOS FET transistors, Phillips BLF147s 
in a push-pull configuration, as are used in the Mark-V. The frequency coverage 
is 50-54 MHz receive and transmit. The FTV-1000 uses the 28 MHz band on the 
Mark V as a tunable IF. The Mark V's frequency display may be set, via Menu, to 
display the 50-54 MHz frequencies directly. Switching on the FTV-1000 
automatically disables the Mark V's power amplifier and enables full featured 
operation on the 50-52 or 50-54 MHz band utilizing all the great receiver 
filters of the Mark V. Power output is 200 watts PEP and spurious emissions are 
at least 60 dB down. (The FTV-1000 may be used with optional VL-1000 Linear 
Amplifier for high power operation). The FTV-1000 obtains the required 30 VDC 
and 13.8 VDC directly from the FP-29 power supply of the Mark V. (Please note 
that if used with the Mark V Field version, you will have to purchase the FP-29 
separately.) There are three SO-239 jacks on the back panel: Transceiver, 
Antenna Normal and Antenna Alternate. The size is 9.6x5.4x13 inches 
(244x137x331 mm). 
Please see page 76 of the February 2001 QST for a complete review of this 
transverter. 

Features 


    • Protection LED (Hi temp) 
    • ALC High LED 
    • High SWR LED 
    • FAN on LED 
        

    • 200 Watts PEP 
    • Requires FP-29 Power Supply (optional with Field version) 
    • High Dynamic Range Front End 
    • Class A Transmitter 
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>