VHFcontesting
[Top] [All Lists]

[VHFcontesting] Reminder: 2M Frequency Calibration/Measurement Test begi

To: vhfcontesting@contesting.com, microwave@lists.valinet.com
Subject: [VHFcontesting] Reminder: 2M Frequency Calibration/Measurement Test begins Monday AM
From: John Ackermann N8UR <jra@febo.com>
Date: Sun, 27 Dec 2009 15:00:41 -0500
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
The Midwest VHF/UHF Society Frequency Measuring Test will begin at 
10:00AM Eastern time on Monday, December 28 and run through 10:00AM on 
Wednesday, Dec. 30.

We will be transmitting about 50 watts on 2 meters from W8RKO's QTH a 
few miles south of Dayton, Ohio (grid square EM79wq). The antenna will 
be a discone (omnidirectional and vertically polarized) at about 60 
feet.  The signal will be CW with an ID every ten minutes, using the 
MVUS club call, W8KSE.

If you want to use this signal to calibrate your rig, the frequency 
(within 50 Hertz of actual) will be:

144.2743 MHz.

The precise frequency (to better than 0.001 Hz) will be posted after the 
January 15 deadline for submissions.

See http://www.febo.com/pages/mvus-fmt/Dec2009/2_meter_test.html for 
more details about this 2 meter transmission.

73,
John
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>
  • [VHFcontesting] Reminder: 2M Frequency Calibration/Measurement Test begins Monday AM, John Ackermann N8UR <=