Hi Mike:
Sounds like you have most of the "T Match" already from your description.
Why don't you go to the CC site and look at the 13B2 diagrams to see what you
actually need.
www.cushcraftamateur.com/prodsupport.php
Then you can go to the customer support page and pick how you want to contact
them and
get prices on the part you need.
www.cushcraftamateur.com/custsupport.php
A number of people on this list have done this and have been happy with the
reasonable cost
and fast service.
Unless you have something against a "T Match", I think this would be the
best/fastest solution.
I'm getting ready to redo my 6M and 2M beams. I'm planning to get the parts
from CC.
73
Bob, K1VU
At 12:28 9/25/2010, Mike Benonis wrote:
>Does anyone have experience building a custom match for the Cushcraft 13B2
>antenna? I recently got one, but it was missing all hardware and the match
>(basically, it came with boom and elements only, including the DE with the
>T-match pieces parts). I feel like it should not be hard to build the match
>but I don't know what the balanced feedpoint impedance is supposed to be.
>
>Thanks and 73 de Mike KI4RIX
>
>
>
>Best regards,
>
>Mike Benonis
>mike@benonis.net
>KI4RIX
>
>_______________________________________________
>VHFcontesting mailing list
>VHFcontesting@contesting.com
>http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|