So I’m thinking of getting an Icom IC-9100 soon. My station is maybe not
typical but I’m sure others have similar. I am only on 2 meters and have
Lunar-Link amp. I have a 2M-18XXX on a tower with no pre-amp. I’m also very
close to getting on the moon with a 4*2M-12 array. This will have a pre-amp at
the antenna feedoint. I may use a coax relay to switch between the 2 antenna
systems but will most likely just manually switch the coax cable. How easy or
hard is it to integrate this rig into that system. The IC-9100 will only be
used for 2 meters.
Currently I use a IC-7700 with a DEMI L series transverter and I’m having
trouble integrate it with my system. Maybe I should try harder to get this to
work but the new rig bug has bite hard.
Also how does it hear and does it have good blocking on 2 meters. I have
several hams who are on 2 meters and I don’t want to get pounded by them.
Thanks
Gregg K9KL
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|