On Fri, Oct 18, 2013 at 3:56 PM, William Stearns <wstearns@gmail.com> wrote:
> I've used everything from Omnirig and HRD to direct
> application connect through the serial link. If you provided a bit more
> information on what you're trying to accomplish and your setup, I could
> provide some better suggestions.
Mike wrote
I have never been much of a individual contester, but I have gone
roving a few times in the past, but I've kinda got the FFMA bug thing,
and V/UHF contesting in general. I'm assembling everything for a
"modest" at the moment station and the rig I will be using is my old
FT-100 for right now. I'm looking at newer rigs but that will have to
wait until after the first of the year which is good because I don't
know what I want yet. So from what I know and much more that I don't I
thinking about a CAT program so I have a larger screen, the eyes
aren't bad but they aren't young either, and I want to it to do
logging as well since I like making the Q's but terrible about writing
it down. This lenovo I just picked up is going to be pretty much
dedicated to the radio.
Since I have three recommendations for the HRD, I may just start there.
--
Mike Urich KA5CVH
http://ka5cvh.com
APIC - D1 & D14 - http://www.arrlstx.org
PIO - D14 S/E - http://harriscountyares.org
BayCERT - http://www.baycert.org/
Life is hard, church shouldn't be!
http://fairmontpark.org
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|