Thanks for all of the suggestions so far, a lot of ideas to read through.
I have two purposes for the filter. I work some of the vhf+ contests with a
friend as a multi op station. We've run into some issues with noise from
the other stations. When roving, the 432 and 222 stations both clobbered
2m. We dropped a 6m filter on that station and diplexer and triplexer
respectively on 70/222. This weekend's contest worked much better, but I
got noise from 6m this time instead. It may be that a 6/2 diplexer is just
the thing.
I'm also putting together a weak signal station for MS. I'm less concerned
about power for this one because it'll be in the rx line before the preamp.
I'm not opposed to buying 2 things if it makes sense, especially as I'm
unsure if I'll need the filter on ms or not.
Sean WA1TE
On Sun, Jan 22, 2017, 14:37 Sean Waite <waisean@gmail.com> wrote:
> Hi all,
> Does anyone know of a decent 2m bandpass filter that can be left inline on
> transmit with 100W? I see them for 6m and below, but not 2m.
>
> I've found this:
> http://www.antennas-amplifiers.com/2m-100W-Bandpass-Filter but was hoping
> for something a smidgen cheaper. If there isn't one, I guess I'll go that
> route.
>
> Thanks!
> Sean WA1TE
>
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|