VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] SSB & FM Testing Tonight: FM18ML McLean Va (DC area)

To: nosigma@aol.com, vhfcontesting@contesting.com
Subject: Re: [VHFcontesting] SSB & FM Testing Tonight: FM18ML McLean Va (DC area)
From: John Young via VHFcontesting <vhfcontesting@contesting.com>
Reply-to: nosigma@aol.com
Date: Sat, 5 Jan 2019 05:35:18 +0000 (UTC)
List-post: <mailto:vhfcontesting@contesting.com>
What a fun and productive night that was.  NY NJ PA MD VA NC WVa on ssb from my 
ditch of a QTH on 6m 2m & 70cm.  FM in VA MD DC on all 4 of the lower bands.  
Lots of tuning and testing on both sides of the QSO's.

Station is locked and loaded.  Now I need to pay my weather bill.  Another 
burnt offering of wax foil capacitors and wall worts should do the trick.

Thank you and 73

John
KM4KMU


Sent from AOL Mobile Mail
On Friday, January 4, 2019 John Young via VHFcontesting <nosigma@aol.com> wrote:
Tonight will be my last chance to do station checkouts before the January 
Contest.  I have until midnight,  If anyone wants to try a QSO on:
6M  SSB or FM2M SSB or FM223.5 FM onlyor 432 SSB or FM
feel free to send me a text or give me a call at 703 678 6795.
Pass  a frequency, time, call and your grid so I can set the beams.  
I have 100w & 12 foot boom beams on all bands listed above and mast mounted pre 
amps for 2m & 70cm.
Been working a lot of FM on 2m & 70cm simplex plus a few SSB stations on 3 
bands but all have been in the local area, nothing challenging.  
I live in a bit of a ditch and have moderate noise on 6m due to airport radar 
so it can be fun trying to get a signal in from the Northeast.
Hope to get some takers
73JohnKM4KMU

_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>