My Cabrillo File says 1.2G and the robot took it. However, the N1MM software
listed Q65 contacts as Q65. The robot did not know how to handle it. I changed
them to DG.
Buddy WB4OMG
-----Original Message-----
From: Marshall-K5QE <k5qe@k5qe.com>
To: VHF Contesting <vhfcontesting@contesting.com>
Sent: Mon, Jan 17, 2022 6:34 pm
Subject: [VHFcontesting] How to list 1296 in the Cabrillo file??
Hello all...we used 1296 this time in the Jan VHF contest. We run
Limited Multi, so in the past, we had a line in the Cabrillo file that
looks like this: CATEGORY-BAND: 6M 2M 222 432.
Now, should we change this line to look like CATEGORY-BAND: 6M 2M 432
1296 OR should it be
CATEGORY-BAND: 6M 2M 432 1.2G?? I have conflicting opinions.....
I don't want to get this wrong and have the robot drop off all our 1296
contacts.
FYI, we had a pretty good Jan contest this time. We got an Es opening
on Sat afternoon that lasted over two hours on 6M. That was really a
blast....to bad we can't have one of those every January Contest....
Thanks for any info(correct info, pse) that you can provide....
73 Marshall K5QE
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|