Bill,
I have a computer running the modem to the network and it is set up to use
Internet Connection Sharing (ICS). You can then have any computer on you
home network telnet. Only the one doing the telnetting needs to be running
Writelog. Of course there are tricks to getting the ICS up and running also.
So the dual Writelog may be a better alternative for you as already
suggested. But I use ICS for other uses as well, so it's there.
73, Ric KV1W
----- Original Message -----
From: Bill <w9ol@dataflo.net>
To: <writelog@contesting.com>
Sent: Friday, March 17, 2000 23:22
Subject: [WriteLog] get cluster from other computer via lan
>
> My modem is on different computer than the one that has Writelog.
> Both computers are connected via a home lan.
> Can I tell Writelog to lan to the modem computer to access a Telnet
Cluster?
>
> Thanks
> Bill
>
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|