[WriteLog] PSK center frequency

[Bruce A. King" <baking@ziplink.net (Bruce A. King)]

Yes, you set it in the writelog.ini file. Here's a snippet from mine which
sets up
PSK at 1500 and CW at 500Hz. Works well w/my 756

73 &GL Bruce W1CSM

[Rttyrite]
Port=2
Speed=0
Type=8
PSK_RECV_FREQ=1500
PSK_XMIT_FREQ=1500
X=-5
Y=193
W=459
H=225
Diddle=1
CW_RECV_FREQ=500


----- Original Message -----
From: Mike Mellinger WA0SXV <wa0sxv@mellinger.com>
To: <writelog@contesting.com>
Sent: Wednesday, April 12, 2000 9:07 PM
Subject: [WriteLog] PSK center frequency


>
> Is there an option in Writelog to set the PSK center frequency.  1khz is a
> bit low for the data function in the 756PRO - would like to use 1500 hz.
>
> Thanks.
>
> Mike WA0SXV
>
>
>
> --
> WWW:                      http://www.contesting.com/writelog
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
>
>


--
WWW:                      http://www.contesting.com/writelog
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com