Unavailable until 4/21/00 - If urgent contact David Levin at dlevin@shra.org
______________________________________
Dana Phillips
General Counsel
Sacramento Housing & Redevelopment Agency
dphillips@shra.org
---------- Original Text ----------
From: "WriteLog Digest" <owner-writelog-digest@contesting.com>, on 4/17/2000
8:31 AM:
WriteLog Digest Saturday, April 15 2000 Volume 03 : Number 103
In this issue:
Re: [WriteLog] CW Decoder Help?-Solved
[WriteLog] Scope display
RE: [WriteLog] CW Decoder Help?
See the end of the digest for information about 3830-digest
----------------------------------------------------------------------
To: <writelog@contesting.com>
Date: Sat, 15 Apr 2000 09:16:57 EDT
From: SavageBR@aol.com
Subject: Re: [WriteLog] CW Decoder Help?-Solved
Hi Phil
Bingo. You hit the problem right on. My program was set up for "Replay"
changing to "Record" solved the problem.
Many thanks,
Bruce
------------------------------
To: <writelog@contesting.com>
Date: Sat, 15 Apr 2000 17:33:36 -0400
From: "Richard B Drake" <rbdrake@erols.com>
Subject: [WriteLog] Scope display
Suddenly the Scope display in my WriteLog tuning window is not
working. It was working a few days ago, I don't recall doing
anything that should affect it but now it just sits there with a
small dot in the middle. The remainder of the tuning window works
normally. Any suggestions?
- ----
73, Rich Drake - W3ZJ
w3zj@arrl.net
------------------------------
To: <writelog@contesting.com>
Date: Sat, 15 Apr 2000 23:20:11 -0000
From: "W. Wright, W5XD" <w5xd@writelog.com>
Subject: RE: [WriteLog] CW Decoder Help?
I strongly recommend you download the latest upgrade,
10.16, from http://www.writelog.com/Downloads.
It comes with a new little program you'll find as
programs\WlogSbControl.exe.
Run that guy to make sure WL knows exactly how to
deal with your sound board.
Wayne
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of SavageBR@aol.com
> Sent: Friday, April 14, 2000 19:54
> To: writelog@contesting.com
> Subject: [WriteLog] CW Decoder Help?
>
>
>
> Ref: Writelog Ver 11.13
> I recently upgraded from Win 95 to Win 98. Now I cannot get
> the CW decoder to
> function. I am using the LINE input to the computer and can
> hear the CW audio
> in the notebook speakers as before the upgrade.
> The decoder window has no indication of a signal or of noise.
> And there is no
> indication of any characters or letters in the Decoded area.
> In other words
> the Scope area and the message area are blank. Apparently
> there is no input
> to the decoder.
>
> Suggestions anyone??
> Thanks
> Bruce
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
------------------------------
End of WriteLog Digest V3 #103
******************************
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-digest-REQUEST@contesting.com
Problems: owner-writelog-digest@contesting.com
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|