WriteLog
[Top] [All Lists]

[[WriteLog] CW with pk232]

To: <writelog@contesting.com>
Subject: [[WriteLog] CW with pk232]
From: jduerbusch@netscape.net (Joe Duerbusch)
Date: 18 Jul 00 13:08:56 CDT
Brad, I wrote an article on how to do this and I had it on my webpage.  But
now that Writelog has CW using the soundcard, there didn't seem to be a need
anymore so I took it off.  But would be glad to send you the article.

But a better way is to run a audio line out of the pk-232 to the mike input of
your soundcard.  This way you can use the pk-232 for rtty and the soundcard
for cw receive.  You would still have to makeup the little cw keying circuit
for transmit.  BTW, the article that I have, the pk-232 will receive cw within
Writlog, but will not key the rig via the pk-232, you will still need the cw
interface circuit.

Joe K0BX



"Brad Nowak" <bnowak@worldnet.att.net> wrote:

Has anyone had luck with CW using pk232?  I am able to get Writelog to
initialize with the pk232 but can't seem to run CW.  Seems the TNC stays in
packet mode and I can't find a way to change mode to CW.  Please forgive the
possible FAQ.

Suggestions??

Brad - N8SNM



--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


Joe Duerbusch K0BX
http://www.qsl.net/k0bx
k0bx@qsl.net

____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at 
http://webmail.netscape.com.

--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [[WriteLog] CW with pk232], Joe Duerbusch <=