WriteLog
[Top] [All Lists]

[WriteLog] PK-232

To: <writelog@contesting.com>
Subject: [WriteLog] PK-232
From: k0bx@qsl.net (k0bx@qsl.net)
Date: 22 Sep 2000 10:09:03 -0700
Hi Chris, please try the following:
If
WriteLog will not communicate with your PK-232, it may be necessary to do the 
editing described below. 
Using NotePad edit C:\Windows\writelog.ini  as follows: 
In the file, go to the section labeled [Ports]. 
Look at the line for the Com port you intend to use.  It will look
like this: 
COM1:=9600,n,8,1,x 
Check to be sure all parameters are correct, then Delete the final x
(but not 
the comma).  It should look like this: 
COM1:=9600,n,8,1, 
Click on File, Save.  Then open WriteLog; this should allow 
your PK-232 to communicate with WriteLog. 
  
For other tips on using the PK-232, goto http://www.qsl.net/k0bx

Hope this helps

Joe K0BX


On Fri, 22 September 2000, David Martin wrote:

> 
> 
> Hi all,
> Anyone using a PK-232 that can help me?  For some reason WL won't talk 
> to it, but it passes the "Initializing Host Mode" test fine.  Logger 
> works great with it.  Any ideas why?  What do I need to setup?  Any 
> help is appreciated! 
> Thanks
> -Chris KL9A
> kl9a@qsl.net
> 
> 
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com

k0bx@qsl.net
http://www.qsl.net/k0bx
_______________________________________________________________________

Free Unlimited Internet Access! Try it now! 
http://www.zdnet.com/downloads/altavista/index.html

_______________________________________________________________________


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>