I've never used either of those two products so I wouldn't know. After
re-reading your original post maybe we are talking about different things.
Software can control the Icom split and read it but reading it when you touch
the radio and manually change the split is a different ball game due to the Icom
interface.
73
Bill & Chris Shell wrote:
> Larry,
> The split works properly with CT and DXBase on the 775.
> -Bill
>
> -----Original Message-----
> From: owner-writelog@contesting.com
> [mailto:owner-writelog@contesting.com]On Behalf Of Larry Lindblom
> Sent: Thursday, November 09, 2000 5:03 PM
> To: n6ws@MSN.COM
> Cc: kg0us@swbell.net; writelog@contesting.com
> Subject: Re: [WriteLog] Split does not appear to work on 775dsp using
> writelog?
>
> The problem has been around for a long time and I believe it is not a
> WriteLog
> problem. The same problem occurs with Logic 5 for Windows and my 775. I
> think the real issue is the Icom interface and how it does/does not work.
> Release 5.3 of Logic finally tracks the icom split but only if you set the
> split from software. Set it at the rig and it will still not track. Just
> the
> nature of the beast, but otherwise the 775 is a great radio.
>
> DE W0ETC
>
> Bill & Chris Shell wrote:
>
> > Tom,
> > My 775 is also not responding to the offset (-) or split command. I'm not
> > sure when the functionality for the 775 split stopped working in WriteLog.
> > Since I tend to only use it on 40m during DX phone contests, I hadn't
> > noticed the problem.
> > 73, Bill
> > N6WS
> > n6ws@msn.com
> >
> > -----Original Message-----
> > From: owner-writelog@contesting.com
> > [mailto:owner-writelog@contesting.com]On Behalf Of kg0us@swbell.net
> > Sent: Monday, November 06, 2000 7:04 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] Split does not appear to work on 775dsp using
> > writelog?
> >
> > Hello Writelog Support,
> >
> > I recently recommended that Tom AE9B buy the writelog program. He
> > purchased it and has been happily using it with his 1000mp. One day,
> > while using packet spotting, he selected a split dx spot. The 1000mp
> > responded by setting his main and sub rx to the proper frequency. I
> > however do not have this luxury on my 775dsp. The Sub rx shows up on
> > the display but is not set to the proper frequency. Is it possible for
> > my 775 to operate properly for split operation using writelog with
> > packet spots? If not, can the writelog ICOM 775dsp driver easily be
> > modified to operate properly when implementing split dx spots as it
> > appears
> > to on the 1000mp?
> >
> > Thanks,
> >
> > Dave Rich KG0US
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
> >
> > --
> > WWW: http://www.writelog.com/
> > Submissions: writelog@contesting.com
> > Administrative requests: writelog-REQUEST@contesting.com
> > Problems: owner-writelog@contesting.com
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|