At 12:47 PM 11/27/00 -0700, Larry Benko W0QE wrote:
>I was using DX4WIN v.5.02 and a 756PRO this weekend for the CQWW contest.
>I only made about 400 contacts and noticed the same thing. I noticed the
>mode change to SSB and then jump back. Also I noticed the band occasionally
>jump to 70cm and then back. No contacts were logged incorrectly. I was
>running the CW decoder in WriteLog 10.21K only and used DX4WIN v.5.02 for
>logging. NO packet connections at all were made!!!!! Therefore it can NOT
>be a packet problem only. Also never before when running DX4WIN only have
>I seen this behavior.
I had this problem in DX4WIN until I set Transceive=OFF in my IC-756 and
the problem went away. However, when you do this, CT can't read the radio
frequency when you spin the dial because the radio no longer "babbles".
73 - Jim AD1C
--
Jim Reisert AD1C <jjreisert@alum.mit.edu>
http://www.ad1c.com/
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|