WriteLog
[Top] [All Lists]

[WriteLog] Radio Setup FT990

To: <writelog@contesting.com>
Subject: [WriteLog] Radio Setup FT990
From: w2up@mindspring.com (Barry Kutner)
Date: Thu, 14 Dec 2000 08:32:08 -0500
John,
I have both an FT-990 and FT-1000D I use with WL. Both are 
connected the same way. To key the radio, there are two basic 
options:
1. Push in the VOX button on the radio. This will let you use it in 
semi-break-in mode on CW and VOX on SSB, and you don't need 
a PTT connection.
2. Go into WL Setup|Ports and activate PTT keying and choose 
your port. Hook this up to one of the several inputs on the back of 
the radio that close the PTT.
Personally, I use method 1. For RTTY, I do use the PTT line.
73 Barry W2UP
> ----- Original Message -----
> From: "John Scott" <kk5vh@austin.rr.com>
> To: <writelog@contesting.com>
> Sent: Thursday, December 14, 2000 10:37
> Subject: [WriteLog] Radio Setup FT990
> 
> 
> >
> > Hi guys,
> >
> > Been watching the reflector for some time and the advice looks
> > great. Now for me..
> >
> > I have an FT990 connected via serial port (COM1:) and the software
> > scans the radio and all track nicely.
> >
> > I cannot seem to get the software to transmit via the radio.
> > Pressing F keys does not make any difference and I cannot seem to
> > find the answer in the manual.
> >
> > I would like to send both SSB and CW via the keyboard.
> > Can the software key the radio via a serial command fast enough to
> > provide CW?? I have recorded wav files for all letters and numbers
> > and put them in wave file area but I am not sure yet how to get the
> > software to use them. If I hit F2 to broadcast a message that I have
> > recorded, the radio key to the transmit mode and I get no modulation
> > or end.  How I stop the system from transmitting is to hit the esc
> > key.
> >
> > Any help out there??
> >
> > Thanks
> >
> > John KK5VH
> >
> >
> > --
> > WWW:                      http://www.writelog.com/
> > Submissions:              writelog@contesting.com
> > Administrative requests:  writelog-REQUEST@contesting.com
> > Problems:                 owner-writelog@contesting.com
> >
> >
> 
> 
> --
> WWW:                      http://www.writelog.com/
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
> 


--
Barry Kutner, W2UP              Internet: w2up@mindspring.com
Newtown, PA         FRC         alternate: barry@w2up.wells.com

--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>