WriteLog
[Top] [All Lists]

[WriteLog] LPT1 Keyer

To: <writelog@contesting.com>
Subject: [WriteLog] LPT1 Keyer
From: rbrann@midcoast.com (Raymond W. Brann)
Date: Wed, 10 Jan 2001 11:25:24 -0500
Hi All, Having trouble using the "W1WEF LPT1" keying interface
with WriteLog.

Just ran into this little problem.
The W1WEF keyer is built into a standard LPT1 connector and has
an RCA connector on the back of the D-shell that plugs into CW keying
line and it should run to the key jack on  ICOM 746.

Well as you may know the RCA connector is a two wire connector.
The rig uses a 1/4 stereo plug.......tip/ring/sleeve that normally goes
to my Bencher paddles.

So ...........how to wire this properly?

Thanks Very Much
Ray


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] LPT1 Keyer, Raymond W. Brann <=