WriteLog
[Top] [All Lists]

[WriteLog] WL10.26B and FT-847

To: <writelog@contesting.com>
Subject: [WriteLog] WL10.26B and FT-847
From: jpixton@shentel.net (Jerry Pixton)
Date: Mon, 16 Apr 2001 10:36:11 +0000
Good Morning,

You definitely need the "null modem" cable. I use Writelog and my FT847 as 
a satellite station so I can give you some comparisons if the crossed cable 
does not solve the problem.

Jerry, W6IHG


At 11:48 PM 4/15/01 +0900, you wrote:

>Hi, folks !
>
>Today I installed a Write Log 10.26B in my notebook PC and tried to
>control my FT-847 on a com port.  But I could not do it.
>
>After connecting my FT-847 with my notebook PC, the radio display which
>is the side of the entry window displays 1212MHz or 1412MHz and so on
>instead of the actual freqeuncy and mode.
>
>The manual of FT-847 says we need a cross cable to use CAT system,  So
>I think I should use a cross cable to control FT-847 on Writelog.  I
>used a straight cable to do so, but did not work.
>
>My notebook PC is a Winbook slim, Sotec (Pentium 133MHz, 48MB RAM)
>and I installed a Windows NT 4.0 in it.
>
>Did anyone try to control FT-847 on Writelog ?  Any help and advice
>will be appriciated.
>
>Thanks in advance.
>
>de JR4ISF/3
>
>----
>Katsuyuki Ishii  kkii@hcc1.bai.ne.jp
>
>--
>WWW:                      http://www.writelog.com/
>Submissions:              writelog@contesting.com
>Administrative requests:  writelog-REQUEST@contesting.com
>Problems:                 owner-writelog@contesting.com

------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs LLC
http://www.pixos.com/designs/
jpixton@shentel.net
------------------------------------------


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>