On Mon, 15 Jan 2001 14:36:21 -0500, I asked:
>Does anyone have a setup for Avery 5160 QSL labels for Writelog? I changed
>the defaults to 3 across, 10 down but the three across were pretty squished
>together.
Guess I never got back to the reflector on this. Here are the two
responses I received. I have not tried either of them, it was only for
one callsign and decided to do the job by hand. Maybe next time.
73 - Jim AD1C
From: John Ragsdale <jr91901@navix.net>
Subject: Re: [WriteLog] Setup for Avery 5160 labels
To: <writelog@contesting.com>
Date: Mon, 15 Jan 2001 17:58:41 -0600
Hi Jim,
Try this:
All in millimeters:
Left edge of left label to last label across 140
Top edge of top label to bottom label top 228
Distance from left edge to left edge of label 5
Distance from top edge to top edge of label 13
73
John NØNF (ex NØOFR)
To: <writelog@contesting.com>
Date: Mon, 15 Jan 2001 18:43:13 -0600
From: Marty Tippin <martyt@pobox.com>
Subject: Re: [WriteLog] Setup for Avery 5160 labels
This worked for me, using 5160 labels:
On the QSL Printing Setup dialog (File | QSL Page Setup...) :
Number Across: 3
Number Down: 10
Number to skip: 0
Left edge to left edge: 141
Top edge to top edge: 230
Distance from left edge: 4
Distance from top edge: 13
Printed nice looking labels - be careful of the font size or you'll run
off
the right edge of the page. You could also probably change the
"distance
from left edge" to 0 or so and still fit the labels nicely (there is
apparently an additional offset generated by WriteLog.)
-Marty NW0L
martyt@pobox.com
--
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, <jjreisert@alum.mit.edu>, http://www.ad1c.com
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|